PUF as well as Rockwool sandwich panels are two of one of the most typical types of insulated sandwich panels around. This message will note the distinctions in between the two panels.
First off, a little introduction regarding sandwich panels. Sandwich panels have a core layer which is sandwiched between two metal sheets. For this reason they obtain their name. The core layer forms sustains to both external layers, that results right into a composite structure with high toughness by light product weight. While Glass Wool panel is extensively understood for its fire-resistive abilities, polyurethane panels as well have their own advantages. The significant distinction in between the two panels is in the insulating core product.
The core insulating layer in PUF panels is polyurethane foam-- PUR
or PU. Throughout the manufacturing procedure, the product is put in between 2
layers of GI sheets. The foam that is poured strengthens with it comes in
contact with the air. This solidified layer adhesives the two sheets with each
other, consequently making a monolithic product with really high insulation
residential properties.
When it concerns PUR, which represents Inflexible polyurethane, the
insulation properties are extremely efficient also. These are light-weight
panels which can be adhered to lots of materials. These panels have really high
strength to weight ratio. These panels are functional as well as for that
reason find application in a large range of products, as a result of its high
insulation capabilities.
The core protecting layer in Rockwool panel is the rock woolen
itself, which is sometimes additionally referred to as mineral woolen. This
mineral woolen or Rockwool is glued in between both GI sheets as well as
develops a monolithic structure.
In Rockwool panels, the core insulation layer is made from mineral woolen. The Rockwool layer holds the two sheets of steels together. Mineral wool is nothing but a fibrous product which is crafted by spinning liquefied mineral or rock materials like slag and also porcelains. Mineral woolen is majorly used for sound proofing and fire-protection.
The vital areas of difference in between PUF and Rockwool panels
remain in its:
1. Insulation Qualities
2. Fire resistive capacities
3. Audio seclusion
4. Installation requires some getting used to
Allows check out these residential or commercial properties in some minor detail as complies with:
Insulation Features
Polyurethane has greater insulation value than that of Rockwool. As an example, a 50 mm thick PUR or PUF panel gives the exact same quantity of insulation as an 80 mm thick Rockwool panel. For That Reason PUF or PUR panels discover application as wall as well as roof panels in factories and also commercial buildings. It keeps the interiors of a building at an optimum temperature with its insulation capacity.
Fire resisting abilities
Polyurethane is an organic substance which leads to fuel the flames on a greater extent. Rockwool on the other hand is constructed from inorganic components, which avoids flames from spreading out past a particular point. So in a circumstance where you need to have a panel that can hold the fire from spreading for an hour or so, then Rockwool is the remedy for you.
Sound Insulation
Apart from fire resisting capabilities, another big benefit of Rockwool panel is sound insulation. Rockwool fibers break down the acoustic waves and subsides their strength.
Rockwool panels are heavier than polyurethane. So it needs to be handled with reasonably more care. Installation would be simple after one has actually practiced few rounds.
EPACK is one of the reputed names in PUF and Rockwool panel
manufacturing segment. If you have a requirement, contact us for a free quote!